市面上生产聚氨酯发泡机厂家还是有很多的，尤其广东发泡机生产制造厂家更多！要想选择中高端的发泡设备，大多数客户都会想到南下广东来看看，那么必定来到弗雷特考察一番。经过一番激烈的对比，大多数用户最终会选择弗雷特生产的聚氨酯发泡设备，那么为什么弗雷特的聚氨酯高压发泡机能成为一枝独秀呢？小编为您总结归纳如下，让您迅速的做出采购决策：

一、性价比高：采用进口自洁式混合头完成物料混合与定量注射，因此每次完成混合与注射后，能自行清除混合腔内残余混合物，不须溶剂清洗。每吨原料发泡同等条件下比低压发泡机多发3-4立方米。混合头使用寿命≥30万次。

二、混合效果好：本系统采用自清洁/止逆/防溅粘/新型V型发泡枪（实现3次混合功能）在120~200bar的混合室压力进行强力混合，可以一机双枪使用，双枪自动切换，变频节能、应用自如。

三、智能化高：采用西门子PLC+双变频多功能安全装置，38个智能检测保护点，储存99个配方，自动化程度高。

四、安全系统强：独立防静电房，梅思安烷气自动检测识别系统，自动2-3级抽风系统，西门子防爆电机，独立导地装置，枪头引线静电导出装置等，外接2组独立对比恒温，12~100种喷灌定时定量控制，开枪温度锁定，故障自检报警等。

五、生产效率高：提供人机界面，显示各种压力、温度、设定注入时间、故障提示等一系列设定参数，人机合一，方便可靠，提高生产效率。

六、发泡质量好:采用双冷热一体机，配合冷热交换器，确保原料温度恒定，误差＜±2℃ ，提高制品发泡质量。

七、一机多用成本低：自身安装电动机，提供动力驱动脚轮，配合轨道进行来回行走，占地面积小。既可以摆放多个模具，提高生产效益，且智能化工程造价低。

      经过以上的总结分析，您是不是知道如何选择一台适合的聚氨酯发泡机设备了呢？如果想了解的更详细一点，欢迎来到弗雷特公司现场考察哦！

Why can Fuleite foaming machine become the top three in Guangdong polyurethane machinery industry?

        There are still many manufacturers of polyurethane foaming machines on the market, especially Guangdong foaming machine manufacturers! If you want to choose mid-to-high-end foaming equipment, most customers will think of going south to Guangdong to have a look, so they must come to Fuleite for inspection. After a fierce comparison, most users will eventually choose the polyurethane foaming equipment produced by Fuleite, so why does Fuleite's high-pressure polyurethane foaming machine stand out? The editor summarizes the following for you, allowing you to make purchasing decisions quickly:

1. High cost performance: The imported self-cleaning mixing head is used to complete material mixing and quantitative injection. Therefore, after each completion of mixing and injection, the residual mixture in the mixing chamber can be removed by itself without solvent cleaning. Under the same conditions, the foaming of each ton of raw materials is 3-4 cubic meters more than that of the low-pressure foaming machine. The service life of the mixing head is more than 300,000 times.

2. Good mixing effect: This system adopts self-cleaning/anti-reverse/anti-splash sticking/new V-shaped foaming gun (to achieve 3 mixing functions) for strong mixing at the mixing chamber pressure of 120~200bar, which can be used with one machine and two guns , automatic switching of dual guns, frequency conversion energy saving, easy application.

3. High intelligence: Siemens PLC + double frequency conversion multi-function safety device is adopted, 38 intelligent detection and protection points, and 99 recipes are stored, with a high degree of automation.

4. Strong safety system: independent anti-static room, automatic detection and identification system of Methian alkane gas, automatic 2-3 level exhaust system, Siemens explosion-proof motor, independent grounding device, gun head lead electrostatic export device, etc., 2 external groups of independent Compared with constant temperature, 12~100 kinds of sprinkler irrigation timing quantitative control, gun temperature lock, fault self-checking alarm, etc.

5. High production efficiency: Provide a man-machine interface to display a series of setting parameters such as various pressures, temperatures, set injection time, fault prompts, etc., man-machine integration, convenient and reliable, and improve production efficiency.

6. Good foaming quality: The use of dual cooling and heating integrated machines, combined with cooling and heat exchangers, ensures that the temperature of the raw materials is constant, and the error is <±2 °C, which improves the foaming quality of the products.

7. One machine has multiple functions and low cost: it installs its own motor, provides power to drive casters, and travels back and forth with the track, with a small footprint. Multiple molds can be placed to improve production efficiency, and the cost of intelligent engineering is low.

       After the above summary and analysis, do you know how to choose a suitable polyurethane foaming machine equipment? If you want to know more in detail, welcome to visit the Fuleite Company on-site inspection!